Setting the DIP Switches
Turn off the printer while removing the DIP switch cover to prevent an electrical short, which can damage the printer.
You can change your interface and print column settings by changing the DIP switch settings.
1.Make sure the printer is turned off.
2.Remove the screw from the DIP switch cover. Then take off the DIP switch cover, as shown in the illustration below.
3.There are two sets of switches. Notice that ON is marked on each set of switches. Use tweezers or another narrow tool to move the switches.
4.Use the following tables to set the DIP switches. Numbers starting with 1 are in the first set, and numbers starting with 2 are in the second.
