, | Note: |
Qsh | There are two ways to replace the ribbon cassette. One is to turn the |
| printer off and on again before installing or removing the ribbon |
| cassette, making sure that data sent from the computer is not lost. |
| (When you turn off the printer power, data sent from the computer |
| is lost.) The other is to open the printer cover and press the |
| RELEASE button before installing or removing the ribbon cassette. |
| Both ways cause the print head to move to the center of the printer |
| and the paper clamp to release. If one of these ways is not used, the |
| ribbon might not be inserted or removed correctly. |
Removing the ribbon cassette
1.Turn the printer power off and on again; then open the printer cover.
2.Grasp the ribbon cassette’s tab on the left side, lift the left side out first, and then pull the cassette out of the printer, as shown in the illustration below.
Tab-
Using the Printer
