Epson user manual TM-U375P DIP-switch functions, 42CPL/35CPL 40CPL/33CPL

Qh* Notes:

1.This function can be used only when a direct connection display module is connected to the display module connector.

2.DIP switch settings cannot be changed after the power is turned on or after the printer is reset through the interface. When turning the power on, do not change the settings of DIP switches 7 and 8.

TM-U375P DIP-switch functions

DIP Switch Set 1

SW	Function	O N	OFF
1-1	Auto line feed	Enabled	Disabled
l-2	Receive buffer capacity	40 bytes	4K bytes
l-3	Undefined
l-4	Undefined
1-5	Undefined
1-6	Undefined
l-7	Undefined
l-8	Undefined

DIP Switch Set 2

S W	Function	ON	OFF
2-1 Undefined
2-2	Print column selection	42CPL/35CPL	40CPL/33CPL
	7 X 9 font/9 X 9 font
2-3	Handshaking (busy condition)	Receive	Off-line or
		buffer full	receive buffer full
2-4	Reserved.
2-5 Settings must not be changed.
2-6 Settings must not be changed.
2-7	Undefined
2-8	nInit reset signal Fixed to ON.

ACAUTION:

Do not change the settings of switch 2-4, 2-5, 2-6 and 2-8.

5. Replace the DIP switch cover and secure it with the screw.

1-22 Setting Up the Printer