Qh* Notes:
1. When printing on a single cut sheet that is narrower than the carriage movement range, once the printer has been put in the cut sheet mode and the sheet of paper has been inserted, the following operations should be avoided: turning the power supply switch on or off, opening the cover, issuing the return home command (ESC <), or sending a reset command through the interface.
When the carriage moves away from the home position, it may come in contact with the left end of the paper, causing a paper jam.
2.The cut sheet waiting state can be canceled by the DLE ENQ 3 command.
3.Use the ASB function to correctl y determine the paper state. See Example Print Control for Cut Sheet later in this section.
Reference Information
