Epson TM-U375 user manual Replacing the Paper Roll

1.Send the appropriate control commands from the computer to print on validation paper.

2.When the VALIDATION/SLIP light flashes, insert a sheet of validation paper into the validation paper inlet (see the illustration below); printing will then begin.

Make sure you insert the validation paper into the inlet as far as it will go.

*	Note:
Qb	When the VALIDATION/SLIP light flashes (this depends on the
	application software), remove the paper from the paper path.

Replacing the Paper Roll

To change the paper roll, follow the steps below.

1. Cut the journal paper on the cutter; then remove the take-up spool.

Using the Printer 2-5