Do not use

Use carefully

Use carefully

Paper feeding direction

Glued area

Glue Location of Slip paper

9Cut sheets with holes (e.g., sprocket holes) within the areas shown in the figures below must not be used. Otherwise, the paper cannot be detected by the paper detector. Paper that is translucent must not be used.

Validation paper

6

3

: Holes are prohibited in this area.

Inserting direct1

E

:

Srnrn(.3z?)

Slip paper

lOmm(.98”)

Inserting direction

in s

1‘

: Holes are prohtbited in this

sure to disable paper-end detection (using ESC c 4) before printing.

Use of multi-ply copy paper with a thick middle sheet may decrease copying capability.

Printing noise may change depending on paper thickness. Noise may increase when thick single-ply paper is used.

Reference Information 4-5

Page 56
Image 56
Epson TM-U375 user manual Glue Location of Slip paper