Grounding the Printer
When you use the printer as a single unit (not connected to an intelligent module), you need to ground your printer. (Intelligent module connection is available for the
Recommended wire is described below. |
| |
Thickness of wire | : AWG18 | or equivalent |
Diameter of terminal to be attached : | 3.2 | |
1.Make sure that the printer is turned off.
2.Connect the ground wire to the ground connector (marked FG) on the bottom of the printer with the screw provided on the printer. Alternatively, another screw located beside the power connector on the
TM-U375
Setting Up the Printer
