Escient MP-100 manual Changing Volume Lock

FIREBALL-MP INSTALLATION & USER’S GUIDE - M22002-01A1

Changing Volume Lock

The Remote is set to control volume of a component through your TV while in the TV, VCR, Cable, or Satellite mode. However, in an Audio mode (i.e. RCV/TNR; AMP, CD), you have separate control of your audio component’s volume.

If your TV is not remote controllable, or if you want volume to be controlled by a different component, you can change the Volume Lock setting to control a volume through a non-associated mode (e.g., through the cable in the TV mode).

To change Volume Lock to another mode:

1.On the Remote, press and hold CODE SET until the LED blinks twice, then release

CODE SET .

2.Enter 9 - 9 - 3 and then press any mode key once (except TV). The LED will blink twice.

3.Now, whenever you press VOL +, VOL –,or MUTE, volume will be controlled by your mode choice.

To change Volume Lock back to the TV mode:

1.On the Remote, press and hold CODE SET until the LED blinks twice, then release

CODE SET .

2.Enter 9 - 9 - 3 and then press TV. The LED will blink twice.

3.Now, whenever you press VOL +, VOL –, or MUTE on the Remote, volume will be controlled by your TV.

APPENDIX H - REMOTE CONTROL

PAGE 146