FIREBALL-MP INSTALLATION & USER’S GUIDE - M22002-01A1
The Remote can be set up to control a second TV or VCR, or any combination of eight home entertainment components. For example, to have the Remote control a TV, a Cable Converter, and two VCRs, you will need to reassign the unused AUX key to operate the second VCR as follows:
1.On the Remote, press and hold CODE SET until the LED blinks twice, then release
CODE SET .
2.Enter 9 - 9 - 2. The LED will blink twice.
3.Press DVD once, then press AUX once.
4.The AUX key is now ready to be programmed for your VCR. See Programming Component Control. To reassign other device keys, repeat steps 1 through 4 by substituting the key sequence from the below chart for the most popular components:
To | Perform |
|
|
|
TV as VCR key: | CODE SET - 9 - 9 | - 2 - DVD - TV | ||
TV as 2nd CBL key: | CODE SET - 9 - 9 | - 2 - CBL - TV | ||
TV as 2nd AUX key: | CODE SET - 9 - 9 | - 2 - AUX - TV | ||
TV as 2nd RCV/TNR key: | CODE SET - 9 - 9 | - 2 | - RCV - TV | |
TV as AMP key: | CODE SET - 9 | - 9 | - 2 | - PP - TV |
TV as CD key: | CODE SET - 9 | - 9 | - 2 | - TB - TV |
TV as SAT key: | CODE SET - 9 | - 9 | - 2 | - FB - TV |
2
You cannot re-assign the FB, TB, or PP keys.
However, the keys can be used in conjunction to
APPENDIX H - REMOTE CONTROL
PAGE 144
