![](/images/new-backgrounds/1301444/301444285x1.webp)
FIREBALL-MP INSTALLATION & USER’S GUIDE - M22002-01A1
substitute the appropriate key (i.e., AUX, CBL, DVD, RCV) for the (Auxiliary, VCR, Cable, Satellite, CD, Amplifier, or Tuner) component you are searching for.
Checking the Codes
If you have set up the Remote using the Searching For Your Code procedure, you may need to find out which
For example, to find out which code is operating your TV:
1.On the Remote, press TV once.
2.Press and hold CODE SET until the LED blinks twice, then release CODE SET .
3.Enter 9 - 9 - 0. The LED will blink twice.
4.To view the code for the first digit, press 1 once. Wait 3 seconds, count the LED blinks (e.g., 3 blinks = 3) NOTE: If a code digit is “0”, the LED will not blink.
5.Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.
6.To check for the codes of your other components, repeat steps 1 through 5, but substitute the appropriate key (i.e., AUX, CBL, DVD, RCV) component you are checking. As before, write down each
APPENDIX H - REMOTE CONTROL
PAGE 143