Euphonix EuCon manual 3Removing screws from the bottom panel

professional control surface

To join two MC Mixes:

1.On one of the MC Mixes, use a #2 Phillips screwdriver to remove the two silver screws (Figure 2-3).

The screws may be tight, so you may have to use some force.

Figure 2-3Removing screws from the bottom panel

2.Lift the black plastic connecting part and side panel up and out of the MC Mix (Figure 2-4).

Figure 2-4Removing connecting part and side panel

3.On the second MC Mix, remove the side panel (see Figure 2-2left) on the end where it will attach to the first MC mix.

4.Slide the connecting part of the second MC Mix into first MC Mix to attach them together (Figure 2-5).

Figure 2-5MC Mixes attached by connecting at side panel

USER GUIDE

15

SETUP AND INSTALLATION

Artist Series