Euphonix EuCon manual 8Ethernet cable and rear panel jack

professional control surface

5.Plug one end of the Ethernet crossover cable into the Ethernet jack (labeled with ) on the rear panel of the MC Mix (Figure 2-8).

Ethernet

cable

Figure 2-8Ethernet cable and rear panel jack

6.Plug the other end of the Ethernet crossover cable into an open Ethernet jack on your computer, router, or Ethernet switch (Figure 2-9).

An Ethernet router or switch is required to connect additional MC Mix units or to a local area network. Note that connecting directly to the computer (Figure 2-9-right) may require removing your Internet cable.

Figure 2-9MC Mix connected to router (left) and directly to computer (right)

7.Turn on your router (if applicable), then turn on your Mac and wait until it finishes starting up.

USER GUIDE

17

SETUP AND INSTALLATION

Artist Series