USER GUIDE
professional control surface
STOP
Press STOP to stop all other functions.
PLAY
Press PLAY to play the project from the current location.
REC
Press REC begin recording at the current location. All tracks armed for recording are punched into record.
4.3.6SEL
Pressing a fader’s SEL key selects that track in the application and attentions (see Channel Mode on page 34) it on the MC Mix.
NOTE: Some applications allow selecting multiple tracks if the Shift key on the work- station is held down while selecting tracks. In this case, the attentioned track is the last one selected.
30 4.3.7 ASSIGN
Press the ASSIGN key to display the Assign tab in the EuControl Settings dialog (see Assign on page 48).
4.3.8REC
Press the REC key to enable recording on a track. The REC key lights red to indicate that track is enabled (armed) for recording. Press the REC key to cancel a track enabled for recording.
SURFACE CONTROLS
NOTE: Some applications blink the REC LED when armed but not recording and light solid when recording.
4.3.9AUTO
To change an application track’s automation mode, press the AUTO key until the desired automation mode appears in the channel display.
Artist Series
