Euphonix EuCon manual Knobs, Basic Knob Use

professional control surface

4.5Knobs

Each fader strip has one touch-sensitive, continuously rotating knob that adjusts parameters such as pan and aux send levels. The knob has a built-in switch allowing it to be pressed from the top. This is called the Knob Top key and is typically used to access sub-menus but also to turn parameters on/off.

SEL	Knob SEL key
	Touch-sensitive knob
ON	Knob On key

Figure 4-7Knob controls

Each knob has the following controls:

•The ON key toggles two-state parameters, such as EQ Band 1 on/off.

•The SEL key changes the knob function or toggles a secondary function’s value, such as an aux send pre/post fader.

4.5.1Basic Knob Use

When the MC Mix is first powered on, the knobs are in normal mode (see Knob Modes on page 34). Each knob controls the left/right pan parameter for its track on the strip.

The knob selector keys can quickly access common parameters in normal mode:

•Press AUX to assign each track’s first aux send to each knob. Press PAGE X to assign the next aux send to the knob. Pressing PAGE W returns to the previous aux send.

•Press PAN to assign the track’s left/right pan control to each knob.

It is also possible to edit plug-ins, EQ, dynamics, and other functions on the knobs.

USER GUIDE

33

SURFACE CONTROLS

Artist Series