Euphonix EuCon manual Appendix a Setting the IP Address

professional control surface

Appendix A: Setting the IP Address

Most MC Mix users will never have to set a static Internet Protocol (IP) address but in the rare cases that require it, the MC Mix does allow for it.

Normally the MC Mix uses Dynamic Host Configuration Protocol (DHCP) to obtain its IP address, typically from a router. The MC Mix will revert to link-local addressing to generate an IP address if a DHCP server is not found on the network, such as when an MC Mix is connected directly to a computer with an Ethernet cable. Both of these methods of obtaining IP addresses can be overridden by supplying a static IP address, which the MC Mix uses in all cases when powered on.

CAUTION: Attempt this only if you have prior experience configuring a network.

USER GUIDE

To set a static IP address:

1.While holding down the PAGE W and PAGE X keys simultaneously, press and release the POWER switch.

Figure A-1(left) shows the Use DHCP screen on fader strip 1's channel display on the MC Mix.

Figure A-1Use DHCP yes (left); Use DHCP no (right)

2.Turn the knob underneath the display clockwise to change the underlined value from yes (default) to no (Figure A-1right).

The Knob SEL and ON keys can be used instead of the knob to decrease or increase the value, respectively.

51

SETTING THE IP ADDRESS

Artist Series