3.11.3 NO HDD
WARNING SETUP MENU
FAN FAULT HDD TEMP. NO HDD
HDD FULL
BUZZERENABLE ALARM OUTPUT 1
ALARM DURATION PERMANENT NETWORK ALARM NO
EMAILNO
The DVR detects when both harddisks are removed, switched off or not detected. Define the alarm reactions in this menu item:
(1)BUZZER: By selecting “ENABLE”, the buzzer is activated.
(2)ALARM OUTPUT: Output relay activation.
1 – Output relay 1 ~ 4 (selection) switches upon alarm. NONE – no output relay reaction upon alarm.
(3)ALARM DURATION: Alarm duration adjustment from 1~99 seconds or permanent.
(4)NETWORK ALARM:
YES: Network alarm activated (for settings refer to NETWORK menu) Network alarm reception requires optional PowerCon software.
NO: No network alarm transmission
(5)EMAIL:
YES: Alarm email transmission (for settings refer to NETWORK menu).
NO: No email alarm transmission.
51
