5.2 PLAYBACK SEARCH
Press the SEARCH key to enter the search menu.
SEARCH
NAVIGATION:
Use the JOG to select values or entries.
Use the ENTER key to go to the next menu item and the DISPLAY key to go to the previous menu item.
Press the SELECT key to confirm a selection. Press the MENU key to leave the search menu.
(1)TIME / DATE SEARCH
Select TIME/DATE in the first row of the search menu to enter the requested playback position in the following rows.
The period available on the connected harddisks is indicated in the START/END TIME field. Select the respective harddisk in the DISK NO field.
SEARCH MENU
METHOD
DATE
TIME
EVENT
DISK NO
TIME / DATE
A/M/V
01
NO | SIZE(GB) | °C | START / END TIME |
01 | 152 | 42 | |
|
|
|
The values in the EVENT row cannot be changed upon time/date search.
The bottom table further shows the total capacity of the used harddisk, its current temperature and the timeframe of available recordings.
ATTENTION: When searching for a playback position just before current recording position, it may occur that this position isn’t available for playback yet (in case the recording segment hasn’t been closed yet). Playback then starts at the next possible position.
60
