3.12 SYSTEM MENU
SYSTEM SETUP MENU |
|
| |
SYSTEM VERSION | V1.22 | ||
SYSTEM VIDEO FORMAT | PAL | ||
LOAD/SAVE CONFIGURATION |
|
| |
NO |
| ||
UPDATE SYSTEM SOFTWARE | NO |
| |
LANGUAGE |
| ENGLISH | |
QUICK PLAY | ON 10 MINUTES AGO | ||
SYSTEM PASSWORD ENABLE | NO | ||
| PASSWORD | RIGHTS | |
************* | ADMINISTRATOR | ||
************* | OPERATOR | ||
************* | GENERAL | ||
Define the following settings in the SYSTEM menu:
(1)SYSTEM VERSION: Display of the installed firmware version.
(2)SYSTEM VIDEO FORMAT: Display of the detected video system PAL or NTSC. The EDR automatically detects the video system upon system startup.
ATTENTION: Auto detection checks video input 1 upon system startup. Therefore, it is compulsory to start the DVR with video signal connected to channel 1. Otherwise, default setting NTSC is loaded!
(3) SAVE/LOAD CONFIGURATION:
Selecting YES opens a sub menu showing the following items (use the JOG for selection):
CANCEL: Return to system menu
DEFAULT: Load default setting after security request YES/NO
ATTENTION: The network settings remain stored despite loading default setting! SAVE: Save the current configuration to CF card / USB stick. LOAD: Load a configuration from CF card / USB stick.
(4)UPDATE SYSTEM SOFTWARE: DVR update with latest firmware version through
YES: After confirmation with SELECT, the firmware update is run. Update is carried out in 3 phases (display at bottom screen margin) and can take up to 5 minutes.
ATTENTION: 1. Before starting the update, stop the recording process.
2.Do not switch the DVR off while update is run.
3.Do not remove CF card or USB stick while update is run. NO: Cancel, return to SYSTEM menu
53
