1.6 SCREEN DISPLAYS
Here’s an overview of the screen displays appearing on the MAIN monitor:
1
2
1. Channel display
2. Event (here: video loss)
3. Display selection
4. Playback status
5. Recording status
Channel display: shows the selected video channel’s description
Event: Event display, may be
Channel-related types of event:
AAlarm: Display of an alarm triggered by alarm input contact
MMotion: Motion detection of the respective camera
VVideo loss: Video signal loss of the respective camera
SSequence: Sequential operation of the respective video channel
*- In multiscreen display, this icon indicates the channel selected for sequential display. Selection via SELECT key. Upon sequence activation, the “*” icon is replaced by S
Global types of event:
OT OT - Over Temperature HDD: Alarm message upon HDD over temperature, displayed in red on all video channels. The device should immediately be switched off. In case the „FAN“ (fan damage) message occured previously, contact the technical service for trouble shooting. If the fan works properly, check the device‘s position as regard to ambient temperature (max. 40°C, fan must not be covered, ensure the sufficient ventilation if device is installed in cabinet or rack).
12
