EverFocus EDR-1640, EDR-920 manual Timer scheduled recording, Event recording

4.2 TIMER – scheduled recording

Define the scheduled recording settings in the TIMER menu.

With activated timer, recording starts and stops automatically.

4.3 Event recording

If event-triggered recordings are programmed in the ALARM and/or MOTION menu, the respective cameras are recorded at the “EVENT” recording rate (programming in CAMERA menu).

ATTENTION:

For this recording mode, the DVR must be in recording standby mode (REC-LED ON).

The DVR can be switched to standby mode either manually (through REC key), via TIMER configuration or through the REC-IN contact.

ATTENTION: HDD shutdown and removal is not admissable during recording and playback mode and upon DVR system startup!

ATTENTION: Switching off the harddisk with the key switch will logoff the harddisk from the system. Remove the harddisk only after the green power source LED at the harddisk tray is extinguished.

57