Extron electronic 4LQXI, 4LDXI manual Changing the Main Fuse, Video Adapter Cables, Documentation

		Appendix B • Reference
Projector Communication Extension Cables	Connectors	Part #
CC 50' (50 ft.)	15/HD/M to 9/D/F	26-305-01
CC 50' Type II (50 ft.)	15/D/M to 15/D/F	26-323-01
CC 100' (100 ft.)	15/HD/M to 9/D/F	26-305-02
CC 100' Type II (100 ft.)	15/D/M to 15/D/F	26-323-02
CC 200' (200 ft.)	15/HD/M to 9/D/F	26-305-03
CC 200' Type II (200 ft.)	15/D/M to 15/D/F	26-323-03
S-Video Adapter Cables
S-VHS 6' (male-to-male, 6 feet)		26-316-02
S-VHS M20' (male-to-male, 20 feet)		26-316-01

S-VHS BNC (male-to-male, S-video to BNC, 6")	26-353-01
Connectors
Captive Screw Phoenix Connectors (6-pin, Audio)	10-163-01
Documentation
System 4xi User’s Manual	68-162-01
System 4xi Label	33-151-01

Changing the Main Fuse

_________ The Main Fuse is located on the Power Supply board. To replace the fuse,

remove the AC Power cord and remove the top cover of the System 4xi (procedure on page 2-3).

The picture below shows the left-rear corner of the System 4xi chassis. Locate the fuse on the Power Supply board.

Remove the fuse from its holder and test it with an ohm meter or other testing device. Replace a bad fuse with a 2 amp, 250v fuse.

If the fuse is not bad, and the unit has no indication of having power, call Extron for instructions on service.

Figure B-2. Locate the Fuse on the Power Supply.

Extron • System 4xi Switcher Series • User’s Manual B-2