Chapter 2 • Configuration and Installation
Projector/Monitor Applications
The System 4xi can be configured for most projectors. Some of the projector manufacturers that Extron supports are:
• | Ampro | • | Mitsubishi |
• | Barco | • | NEC |
• | Digital Projection | • | Panasonic |
• | Eiki | • | Seleco |
• | Electrohome | • | Sharp |
• | Epson | • | Sony |
• | Digital Projection | • | Toshiba |
• | Hughes/JVC | • | Zenith |
•Infocus
If your projector manufacturer is not on the above list, please consult your Extron representative.
_______ Because this manual is for the System 4xi Series switchers, the name “System
4xi ” will be used except when referring to a specific model.
The following diagram is a typical example of System
Rear Panel
INPUT 1
INPUT 2
INPUT 3
INPUT 4
OUTPUT
H/HV | V | AUDIO | H/HV | V | AUDIO | H/HV | V | AUDIO | H/HV | V | AUDIO | PJ COMM | H/HV | V | AUDIO |
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
R/C | G/Y | B | R/C | G/Y | B | R/C | G/Y | B | R/C | G/Y | B | RS 232 | R/C |
| G/Y | B |
Projector Communication
Extension Cable
BNC Cable
Projector
Comm Adapter
Projector
Figure 2-2. System 4xi Outputs. A factory label identifies the configuration.
Configuring the System 4xi for your application requires the following major steps using the System 4xi Projector Communications Kit instructions for your specific projector or monitor:
Extron • System 4xi Switcher Series • User’s Manual |
