XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 24
Using the XTP System Configuration Software
The XTP T UWP 202 can be controlled directly from the front panel Config port or remotely
from an XTP matrix switcher.

Connections

When opening the XTP System Configuration Software, the Connections screen opens
first. This screen is used to establish communication with an XTP device through USB
connection (see Configuration port on page 11). Ensure the transmitter is connected and
powered on before attempting to connect to it.
Figure 19. Connections Screen
1. From the Connections screen in the software, select the USB radio button (see
figure 19, 1).
2. Select the connected device to be controlled from the displayed list (see figure 19, 2).
3. Click the Connect button (see figure 19, 3). The Device Settings screen opens.