XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 29
Input/Output tab
Click the Input/Output tab (see figure 27, 1) to open the Input/Output screen. It contains
input information and options to apply automatic settings to individual inputs.
Figure 27. Input/Output Tab
2 Input — Displays the input name.
3 Signal Type — Displays the signal type of each input. Input 1 is analog. Input 2 is
HDMI/DVI.
4 Auto-Image — Attempts to size and center the input signal based on the aspect ratio
setting. Auto-Image is applied whenever there is a change in the input sync.
5 Auto Memory — Recalls input and image settings for signals that have previously been
applied. When it is disabled, the XTP T UWP 202 treats every newly applied input as a
new source.
6 HDCP Authorization — Select the HDCP Authorized check box to have input 2
report as an HDCP authorized device. If the box is not checked, the source will be
blocked from encrypting its output. This may result in some content not being passed
by the source device.