XTP T UWP 202 Wallplate Transmitter • XTP System Configuration Software 25
Top Menu
The top menu bar contains three menus for configuring software settings.

File menu

The File menu contains options for disconnecting from the transmitter and exiting the
program. To access the menu, click the File menu.
Figure 20. File Menu

Disconnect

This option disconnects the connected device from the XTP System Configuration Software.
From the File menu, select Disconnect. The Connections screen opens.
NOTE: If the device is already disconnected, the Disconnect option is disabled until a
device is connected.

Exit

This option disconnects the transmitter from the software and closes the application.
From the File menu, select Exit. The application closes.

Tools menu

The Tools menu contains an option for updating firmware. To access this menu, click the
Tools menu.
Figure 21. Tools Menu
NOTE: The Backup and Restore and Software Preference options are not
available when directly connected to the XTP T UWP 202.