Powering the Falcon
Feature | Function/Description | More | |
Information | |||
|
| ||
|
|
| |
| Use the stylus for navigation and to select items on the touch screen, and to | Figure 14, | |
Stylus | select characters on the | ||
after use so you don’t lose or misplace it. An optional Stylus Tether is avail- | page 21 | ||
| |||
| able for both models. |
| |
|
|
|
Powering the Falcon
Battery Pack
The battery pack in the Falcon is a 3.7 V, Lith- ium Ion battery pack. You will be alerted with a message dialog box when the battery pack reaches a low state.
After charging the first time, a complete charge takes about four (4) hours depending on the bat- tery pack’s state and the recharging method. A sample battery pack label is shown at the right.
3.7V
Product of USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2000mAh |
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
| U |
| S | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
CAUTION: Battery can explode, leak or catch fire if exposed to high temperature, water or fire. Do not short circuit, open or disassemble battery. Recycle or dispose of properly.
You must charge the battery pack and backup battery in a dock or with a power cable prior to your first use of the Falcon. The initial charge time is approximately 24 hours.
If you remove the battery pack or it fails, there is a 30 minute window in which to
CAUTION insert a charged battery pack before the backup battery fails. If your backup bat- tery fails, the contents of the RAM memory will be lost. If your backup battery is less than fully charged, there is a proportionally smaller window of time available to replace the main battery. Usage time will also be reduced.
Always charge the battery pack within the temperature range of
Use only the authorized power supplies, battery packs, chargers, and docks sup- plied by your PSC reseller. The use of any other power supplies can damage the Falcon and void your warranty. Refer to the PRG for the correct power supplies and Accessories.
Quick Reference Guide | 9 |
