8. Conversion to LP Gas
Fig.8-1
B 
A
C | |
|
A – Jet, B – Internal injector, C – External injector
Fig.8-2
Art No
Fig.8-3
Conversion from Natural Gas (1.0 kPa) to LPG X Propane (2.75 kPa)
nnA suitably competent person must perform the conversion. After conversion the installation must comply with the relevant regulations and also the local electricity supply company requirements. Read the instructions before converting this appliance.
Failure to convert the appliance correctly could
nn
invalidate any warranty or liability claims and lead to prosecution.
When servicing or replacing gas-carrying
nn
components disconnect from the gas supply before starting operation. Check the appliance is gas sound after completion.
DO NOT use reconditioned or unauthorised gas
nn
controls.
Disconnect from the electricity and gas supply
nn
before servicing.
Before electrical reconnection, check that the
nn
appliance is electrically safe.
Injectors
Remove the burner caps and heads. Remove the old jets
Tap Adjustment
Classic – Removing the Control Panel
Remove the handrail. Now remove the 2
Pull o all the control knobs and remove the xing screws underneath the control panel.
Lift the control panel and pull forwards, taking care not to damage or strain the wiring.
Toledo – Removing the Control Panel
Pull o all the control knobs and remove the xing screws underneath the control panel.
Slide the control panel to the right and then pull forwards, taking care not to damage or strain the wiring.
Replacing the Tap Bypass Screws
Unscrew the tap bypass screw
Ret the control panel.
26
