WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity before servicing. Check appliance is safe when you have nished.
3 Controls
3.1.To Replace the Ignition or Light Switch
DISCONNECT FROM THE ELECTRICITY SUPPLY. Remove the control panel (see 1.1).
Note: The old switch may be destroyed during removal. Remove the old switch from its bezel by gripping the switch body behind the control panel and twisting sharply. Remove the switch bezel by folding back the locking wings and pushing forward.
To t the new bezel to the control panel: rst line up the raised key on its body with the
Assemble the new switch to the bezel by lining up the key sections and pushing home. Fit the new button by pushing in from the front.
Replace the control panel in the reverse order and test for correct operation.
3.2To Replace the Clock
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel (see 1.1). Pull o the timer control buttons.
Undo the timer xing screws and remove the timer/ mounting bracket assembly from the control panel.
Remove the timer from its mounting bracket by depressing the plastic lugs on the timer case, and at the same time pulling the unit forward.
Reassemble in reverse order. When replacing the leads, refer to the wiring diagram. Check the operation of the timer.
3.3To Change the Ignition Generator
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forwards to gain access to the cover box at the rear of the cooker. Remove the screws securing the cover and lift clear. Pull o all the leads to the generator noting their positions. Slacken the 2 screws holding generator to cooker and remove the generator.
Fit the new generator to the cooker and replace the leads. Refer to the wiring diagram and reassemble in reverse order. Check ignition performance.
4 Grill
4.1To Replace the Grill Controller
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the control panel and hotplate (see 1.1 & 2.1). Disconnect the wiring from controller. Remove the
2 screws holding the controller to the mounting panel.
Fit the new controller and reassemble in the reverse order. Check for correct operation.
4.2To Replace the Grill Element
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Remove the grill pan from the grill chamber. From inside the grill compartment, undo the 2 screws and washers and remove the enamelled front shield from the grill roof. Remove 2 screws and washers securing the grill element front support. Remove the screws from the grill elements.
Carefully lift the elements out and disconnect the leads from the element terminals, noting their position.
If it is not possible to disconnect the leads in this way, pull cooker forwards to gain access to the rear.
Remove the screws securing the electric cover to the back sheet, and then remove cover and disconnect the terminals from the rear.
Fit the new elements and reassemble in reverse order. Check the operation of the grill.
5 Ovens
5.1To Remove the Oven Inner Back
Main Oven
Open the main oven door. Remove the 4 screws and washers securing the inner back to the back of the oven
Reassemble in reverse order, making sure that you fully tighten the 4 screws and washers.
Tall Oven
Open the tall oven door and remove the 2 screws and washers securing the inner back to the back of the oven. Carefully lift away the inner back.
Reassemble in reverse order.
Check the door for correct operation.
5.2To Change the Oven Fan
DISCONNECT FROM THE ELECTRICITY SUPPLY.
Pull the cooker forward to gain access to the rear. Remove the screws securing the electric cover to the back sheet and remove the cover. Disconnect the
3 terminals connected to the fan, noting their position.
Remove the oven inner back (see 5.1). Hold the fan blade and remove the centre nut
2 brass washers, fan blade and circlip. Unscrew the fan retaining nuts and washers (3 o each) and lift the fan away from the rear of the cooker.
30
