Manuals / Falcon / Household Appliance / Stove

Falcon U108610-07 Gas Connection, Pressure Testing, Natural Gas, Propane, Installation, 9

Models: U108610-07

1 40

Download 40 pages 28.4 Kb

Page 25

Gas Connection

INSTALLATION

Check the appliance is electrically safe and gas sound when you have nished.

Gas Connection

Must be in accordance with the relevant standards.

The gas supply needs to terminate with a down-facing threaded tting ½” connection. The inlet connector is located just below the hotplate level at the rear of the cooker.

Because the height of the cooker can be adjusted and each connection is dierent it is dicult to give precise dimensions. Ideally, the house supply connection should be in the shaded area (Fig.7-9).

Means of isolation must be provided at the supply point by either an approved quick-connect device or a Type 1 manual shut-ovalve.

The hose should be tted so that both inlet and outlet connections are vertical so that the hose hangs downwards in a ‘U’ shape (Fig.7-9).

A exible connection is supplied with the cooker. If it is necessary to use another hose it must be to AS 1869 Class B and be suitable for your gas type.


		240		A
					Fig.7-9
	100

100

300

Gas inlet

All dimensions in millimetres

A – Position of gas supply connector

If in doubt contact your supplier. Screw connect the threaded end of the hose into the gas inlet.

After completing the gas connection, check the cooker is gas sound with a pressure test. When checking for gas leaks do not use washing up liquid – this can corrode. Use a product specically manufactured for leak detection.

Natural Gas

The adjustable spring loaded gas pressure regulator is present to give a nominal pressure of 1 kPa on Natural gas. Connect to the Rp ½ inlet on the underside of the pressure regulator.

Propane

This cooker is supplied ready for use on Natural gas. A conversion kit for Propane as is supplied with the cooker – see the ‘Conversion to Propane Gas’ section.

Pressure Testing

The pressure test point is accessible on the inlet pipe at the rear. Remove the test nipple screw and t a pressure gauge to the test point. Turn on and light two of the hotplate burners.

For Natural gas cookers the pressure should be 1 kPa. For Propane X cookers the pressure should be 2.54 kPa.

23

Image 25

Falcon U108610-07 installation instructions Gas Connection, Pressure Testing, Natural Gas, Propane, Installation, 9

Contents

User Guide Installation Instructions90 Dual Fuel U108610-07Contents WARNING The appliance and its accessible parts 1. Before You Startsurfaces To avoid overheating, DO NOT install the cooker nnDO NOT use a steam cleaner to clean the cookerAlways keep combustible materials, e.g. curtains nnThis appliance is heavy so take care when moving itand ammable liquids a safe distance away from your cooker DO NOT store ammable materials in the storageHotplate Burners 2. Cooker OverviewA B C D Fig.2-1Fig.2-3 Fig.2-4 Wok BurnerFig.2-5 Fig.2-6 Fig.2-7will be unstable DO NOT put it on any other burner - it is not DO NOT put it crossways - it will not t properly anddesigned to t in any of the other pan supports Fig.2-12 Always leave space around the griddle for the gasesArtNo.210-0001 Classic grill control nnNever close the grill door when the grill is onFig.2-15 Fig.2-16A B C D E F Setting the Time of DayMinute Minder To Stop the Ovens AutomaticallyKey Lock AUTO is Showing, But you Want to Reset to Manual CookingFig.2-30Fig.2-31 Fig.2-32Oven Shelves - Right-hand Tall Oven Oven Shelves - Left-hand Main OvenThe Handyrack Main Oven Fig.2-35General Oven Tips Tips on Cooking with the TimerDO NOT use the timed oven if the adjoining oven is already warm4. Cooking Table DO NOT mix dierent cleaning products - they may 5. Cleaning Your CookerThe Single Ring Burners The Wok BurnerBefore you remove any of the grill parts for cleaning ‘Cook & Clean’ PanelsDO NOT use harsh abrasive cleaners or sharp metal Do not use steel wool, oven cleaning pads, or anyRecommended Cleaning Method Recommended Cleaning MethodRecommended Cleaning Method Removing the Main Oven LiningsHotplate ignition or hotplate burners faulty 6. TroubleshootingWhat cleaning materials are recommended for the cooker? Never use caustic or abrasive cleaners as these willFig.6-3 Fig.6-1 Fig.6-2Fig.6-4 An oven light is not workingIf you Have a Problem 7. InstallationOut of Warranty INSTALLATIONINSTALLATION Installer’s Name Installer’s Company Installer’s Telephone NumberRead the instructions before installing or using this appliance AS 5601 - ‘Gas Installations’You will also need the following tools INSTALLATIONChecking the Parts 1. Overhead - Measurement A INSTALLATION2. Side Clearances - Measurements B & C 3. Side Clearances - Measurement D & ELowering the Two Rear Rollers INSTALLATIONCompleting the Move On no account try and move the cooker while it isUnless properly installed, the cooker could be tipped by INSTALLATIONFitting the Stability Bracket and Chain Fitting a Stability BracketINSTALLATION Pressure TestingGas Connection Natural GasA N Fixed WiringFig.7-10 Fig.7-11Grill Check Hotplate CheckOven Check Fitting the Handles and Handrail Classic onlyinvalidate any warranty or liability claims and lead to prosecution 8. Conversion to LP GasWhen servicing or replacing gas-carrying Classic - Removing the Control PanelFig.8-4 1.1 To Remove the Control Panel 9. Servicing1.2 To Remove the Side Panels WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON2.2 To Replace the Hotplate Control Taps 2.1 To Remove the Hotplate2.3 To Change a Hotplate Burner Injector 2.4 To Replace a Hotplate Burner Electrode3.2 To Replace the Clock 3.1. To Replace the Ignition or Light Switch3.3 To Change the Ignition Generator 4.1 To Replace the Grill Controller5.4 To Change an Oven Element Thermal Cut-out 5.3 To Change the Oven Element5.5 To Replace an Oven Thermostat WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON6.6 To Adjust the Main Oven Door Catch Keep 6.3 To Adjust the Main Oven Door Angle6.1 To Remove the Grill Door 6.2 To Replace the Main Oven Door6.8 To Replace the Tall Oven Door Outer Panel 6.7 To Remove the Tall Oven Door6.9 To Replace the Tall Oven Door Magnetic Latch 6.10 To Change an Oven Door SealDescription 10. Circuit DiagramDescription ColourMaximum power output @ 230V 50 Hz 11. Technical DataUsable volume litres COUNTRY OF DESTINATION AustraliaPage Page Tel +44 0 1926 457400 Fax +44 0 1926 Clarence Street, Royal Leamington Spa Warwickshire, CV31 2AD, EnglandE-mail consumers@falconappliances.co.uk