1625
Users Manual
Control Loop
After turning the function rotary switch, the voltage display mode is reached. Pushing "DISPLAY MENU" now calls up the control loop. According to the selected measuring function, different setting values can be displayed and changed in the control loop. The "DISPLAY MENU" button switches between the different set values inside a contiuous loop. The "SELECT" button selects the decimal point to be changed. Pushing the "CHANGE ITEM" button the instrument either switches between certain set values or increases the decimal point selected with "SELECT" by 1.
After parmeter setting has been finished the next display can be called with "DISPLAY MENU" or the measurement can be started with "START TEST".
Depending on the selected function, the following parameters can be displayed or changed:
Function | Parameter | Setting Range | Remarks |
|
|
|
|
| U ST |
| display only |
| F ST |
| display only |
RE | FM | (AFC/94/105/111/128) Hz |
|
3pole |
|
|
|
|
|
|
|
| UM | 48 V/20 V | selectable to 20 V |
|
|
| with CODE |
|
|
|
|
and | RK | 0.000 Ω ... 29.99 Ω | in position RE |
|
|
| 3pole only * |
|
|
|
|
| RE LIMIT | 0.000 Ω ... 999 kΩ | only if activated |
|
|
| with CODE |
|
|
|
|
RE | }(warning | On/Off | only if RE LIMIT |
4pole |
|
|
|
| Sound) |
| is activated with |
|
|
| CODE |
|
|
|
|
| R* | On/Off | only if activated |
|
|
| with CODE |
|
|
|
|
RE | U ST |
| display only |
| F ST |
| display only |
28
