Note:

Backup requires substantial battery power. If you attempt to backup to MMC while the battery power is low, the error message “The operation was unsucessful. Change your batteries or erase the MMC, then try again” appears.

Important!

If there is not enough memory on the MMC to perform a back- up, the message “The MMC has insufficient free space to backup your data” appears. Either erase the MMC or use a different MMC.

Backing Up to MMC

To save a backup copy of the eBookMan Operating System, core applications, and information you entered into your eBookMan on an MMC, follow these steps.

1.Insert an MMC into your eBookMan following the instructions under “Inserting MMCs” on page 209.

The MMC must be “writable.” You can not save to a read- only MMC.

2.At the Launcher, tap .

3.Tap MMC Backup.

The MMC Backup dialog box appears.

MMC Backup dialog box

If the MMC is empty, the message “The current MMC has no backup on it” appears.

If the MMC contains a backup, the message “The backup was created on 00/00/00 at 00:00 AM/PM” appears with the actual date and time of the last backup.

4.Tap Backup to save all files to MMC.

If a backup already exists, it will be deleted. The message, “This backup replaces the current backup on the MMC.” appears. You must tap OK to proceed or tap Cancel to stop the process.

The Backup screen appears.

Backup screen

To stop the backup, tap Cancel. If you cancel, a partial backup is saved.

210 Appendix