HIGH EFFICIENCY DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1.7.8Replacing the Frypot (cont.)
26.Ensure wires and tubes will not be caught on the frypot when it is removed.
27.Remove frypot from fryer by lifting up and out.
28.Position the frypot upside down on a suitable work surface.
Lifting frypot from fryer.
29.Record position of the valve stem in relation to the frypot prior to removing the drain valve. If equipped, remove microswitches and mounting hardware from valve prior to removal. Using a suitable wrench, remove the drain valve from the frypot. Use Loctite PST567 sealant when installing drain valve on replacement frypot.
30.Remove all other hardware accessories from the frypot.
Removing drain valve from frypot.
and
31.Reverse the above steps to install the replacement frypot.
32.Add a bead of silicon around the edges of the new frypot, sealing the seam where the frypot and the cabinet meet. Only do this when the frypot is completely installed.
