Fujitsu 3XAX-00803AAS user manual Procedure 3-3 Creating a Dial-up Connection Continued

Installation and Software Setup for an Apple Macintosh Computer In Commercial Confidence

Procedure 3-3: Creating a Dial-up Connection (Continued)

2.Press <Ctrl 1> to view the additional tab options (as shown below), then select the Configuration tab.

3.Verify that the Configuration tab shows the VPI/VCI default values below. Do not change these unless instructed by your service provider.

Configuration	Default Value
Modulation	Multimode
VPI	0
VCI	38
Encapsulation Mode	RFC-2364 Vc multiplexed PPP
ATM Mode	PPP over ATM

4.Click Apply and exit the Modem Setup window.

5.Connect your modem as shown in Procedure 3-4.

Page 3 - 10	ADSL USB Modem - User Manual
Issue 02 March 02	FTEL