Fujitsu DVD Player manual Media Player Drive, Media Player Software, P O I N T S, C A U T I O N

U s e r I n s t a l l a b l e F e a t u r e s

Media Holder Tray

Media Eject Button

Figure 4-6 Media Player Drive

Media Player Drive

Your Fujitsu LifeBook notebook contains a media player drive which is either a CD, DVD, CD-RW, or DVD/CD- RW combo player. A DVD player gives you access to movie, software, and audio DVD/CDs. A CD-RW player allows you to access software or audio CDs, and to write data onto recordable CDs.

MEDIA PLAYER SOFTWARE

DVD Model only: With the media player drive and Media Player software you can play DVD movies on your note- book. The media player includes controls which allow you to take full advantage of the features of a DVD movie, as well as standard features such as fast forward, fast reverse, pause, etc.

CD-RW Model only: With the media player drive, you can read audio CDs, and write data onto a recordable CD-R or CD-RW disc.

P O I N T S

■Prior to using your Media Player, you must install the Media Player software. Refer to the applicable readme file on the Driver Applications CD-ROM for instructions on installing you Media Player software.

■You should periodically check the Fujitsu Web site at www.fujitsupc.com for current updated drivers.

C A U T I O N

Do not operate your media player drive unless your LifeBook notebook is sitting on a flat surface. Using a drive when the system is not level may damage the drive or prevent proper operation.

C A U T I O N

Prolonged use of the media player drive, such as watching a DVD movie, will substantially reduce your battery life.

LOADING A DVD, CD, CD-R, CD-RW, OR COMBO (“MEDIA”)

To load a disc into your media player drive, follow these steps:

1.Push and release the eject button on the front of the media player drive to open the holder tray. The tray will come out of the notebook a short distance.

2.Gently pull the tray out until a media disc can easily be placed in the tray.

W A R N I N G

There may be a protective sheet in the tray from when it was shipped; please make sure it is removed before operating the drive.

3.Place the media into the tray, label side up, with the hole in the center of the disc. Snap the disc onto the raised circle in the center of the tray.

4.Gently push the holder tray back in until you hear a click. (Figure 4-7)

P O I N T

If you have disabled the Auto Insert Notification Function, you will have to start the drive from

your desktop, since your notebook will not automati- cally recognize that media has been loaded.

45