Fujitsu DVD Player PC Cards, Installing Pc Cards, Removing Pc Cards, W A R N I N G, C A U T I O N

U s e r I n s t a l l a b l e F e a t u r e s

Eject Button

PC Card

PC Card Slot

Figure 4-8 Installing/Removing PC Cards

PC Cards

Your Fujitsu LifeBook notebook supports Type II PC Cards, which can perform a variety of functions.

Some available PC Cards:

■Fax/data modem cards

■Local area network (LAN) cards

■IDE solid-state disk cards

■SCSI cards

■Smart Card holder

■Other PC Cards that conform to PCMCIA 2.1 or CardBus standards

For further information, refer to the instructions supplied with your PC Card.

INSTALLING PC CARDS

PC Cards are installed in the PC Card slot. To install a

PC Card, follow these easy steps: (Figure 4-8)

W A R N I N G

Installing or removing a PC Card during your LifeBook notebook’s shutdown or bootup process may damage the card and/or your notebook.

W A R N I N G

Do not insert a PC Card into a slot if there is water or any other substance on the card as you may perma- nently damage the card, your LifeBook notebook, or both.

1.See your PC Card manual for specific instructions on the installation of your card. Some PC Cards may require your notebook to be Off while installing them.

2.Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards.

3.Insert your PC Card into the slot, with the product label facing up.

4.Push the card into the slot firmly until it is seated in the opening. You will hear a click and the Eject button will pop away from your notebook.

5.Flip the Eject button towards the rear of your notebook to lock the PC Card.

REMOVING PC CARDS

To remove a PC Card, follow these easy steps:

C A U T I O N

Windows has a shutdown procedure for PC Cards that must be followed before removing a card. (Please review your operating system manual for the correct procedure). Before removing a PC Card in Windows 98 Second Edition, shut down PC Card operation using PC Card Properties in the Control Panel. Before removing a PC Card in Windows 2000 Professional, shut down PC Card operation using the Unplug/Eject Hardware icon located on the taskbar.

1.See your PC Card manual for specific instructions on removing your card. Some PC Cards may require your notebook to be in Suspend Mode or Off while removing them.

P O I N T

If the dialog box states that the device cannot be removed, you must save all of your open files, close any open applications and shut down your notebook. Once your notebook has been shut down, you must turn Off the power using the power switch.

49