Fujitsu fi-5950 ■Intelligent Multifeed Function, Item in, Comments, Operation, Applicable case, Method to bypass Multifeed, 963.12 Not detecting Multifeed for fixed format

■Intelligent Multifeed Function

There are three modes; select one according to your needs.

Select a mode by using the Software Operation Panel. For how to select a mode, see section 2.

Item in	Method to bypass Multifeed	Applicable case	Comments
Software
Operation
Panel
Manual mode	When a Multifeed error occurs, press [Send to] to	Use this mode when you	Pages scanned before
(Bypass by front	eject sheet in the scanner's transport path. Examine	want to continue scan-	errors are sent to memory.
panel button)	the last sheet scanned.	ning, while checking for	Extraneous images may
	If no paper is glued on the ejected sheet, return the	glued paper every time a	be generated during a
	sheet to the Hopper and press the [Scan] button.	multifeed error is	Multifeed error.
	If glued paper is present on the ejected sheet, return	detected.
	the sheet to the Hopper, press the [Function] button
	once (Slow Blink rate of the function number display
	will change to Fast Blink rate) and press the [Scan]
	button. The scanner will not check for a Multifeed
	error on the first sheet being scanned.
	The following sheets are checked for Multifeed
	errors with the already-existing Multifeed settings in
	the Software Operation Panel or driver. (Default)
Automode 1	When a Multifeed error occurs, press [Send to] to	Use this mode when you	Pages scanned before
(Bypass by com-	eject sheet in the scanner's transport path. Examine	scan many sheets in a	errors are sent to memory.
bination of length	the last sheet scanned.	fixed format; for exam-	Extraneous images may
and position)	If no paper is glued on the ejected sheet, return the	ple, when every sheet has	be generated during a
	sheet to the Hopper and press the [Scan] button.	the same size glued paper	Multifeed error.
	If glued paper is present on the ejected sheet, return	at the same position.
	the sheet to the Hopper, press the [Function] button
	once (Slow Blink rate of the function number display
	will change to Fast Blink rate) and press the [Scan]
	button. The scanner will record the length and posi-
	tion of the glued paper that caused the error.
	The following sheets are checked for Multifeed
	errors and then the scanner bypasses Multifeed, if
	the scanned overlap pattern is same as already
	recorded pattern(s).
Automode 2	When a Multifeed error occurs, press [Send to] to	Use this mode when you	Pages scanned before
(Bypass by	eject paper in the scanner's transport path. Examine	scan multiple sheets,	errors are sent to memory.
length)	the last sheet scanned.	each having different-	Extraneous images may
	If no paper is glued on the ejected sheet, return the	size glued paper at a dif-	be generated during a
	sheet to the Hopper and press the [Scan] button.	ferent position.	Multifeed error.
	If glued paper is present on the ejected sheet, return
	the sheet to the Hopper, press the [Function] button
	once (Slow Blink rate of the function number display
	will change to Fast Blink rate) and press the [Scan]
	button. The scanner will record the length of the
	glued paper that caused the error.
	The following sheets are checked for Multifeed
	errors and then the scanner bypasses Multifeed, if
	the scanned overlap pattern is the same or shorter
	than the already recorded pattern.

963.12 Not detecting Multifeed for fixed format