3.Move your hands away from the stacker slowly.⇒The stacker will be fixed in a position tilting forward.

• When set to “Bottom edge” position, the stacker does not move up or down

HINT

 

and becomes immovable even during scanning operation.

 

 

 

 

• In this position, the stacker’s maximum load will be 200 sheets.

 

 

• If the pages do not stack well, use the Document Smoother. (“2.8 Using

 

 

 

 

the Document smoother” on page 27)

2

ATTENTION

When you align the documents from the leading edge (by tilting forward setting of stacker), the documents must meet the following conditions:

(Length) ⎟ (Width) < 1.5
SCANNER BASIC

<Switching back to the horizontal setting

1.Slide the stacker out towards you.

2.Push down the inner part of the stacker.⇒The stacker goes back into its horizontal position.
OPERATIONS

2.7 Setting up the Stacker

 

25