Fujitsu fi-5950 1.1 Names and Functions of Parts, ■Front side, No, Name, Function, 21.1 Names and Functions of Parts, This section describes the names of parts

1.1 Names and Functions of Parts

This section describes the names of parts.

■Front side

	1	2	3	4	5	6
	7
	8
	9
	10
	11					15
	12
			13	14
No.	Name					Function
1	Stopper	Prevents ejected documents from dropping off the scanner.
2	Stacker side guide	For aligning ejected documents to a certain width.
3	Top cover	Cover to access the consumables storage box and Post-Imprinter
		option (sold separately).
4	Stacker	Documents will be ejected into the Stacker after scanning.
5	Ejector	For ejecting the documents after scanning.
6	Operator panel	For operating the scanner.
7	Stacker extension	For scanning long documents. Pull the extension out according to
		the document’s length.
8	ADF cover	Open the cover for cleaning the inner parts of the ADF or for
		replacing consumables.
9	ADF cover open button	Button used to open the ADF
10	Pre-imprinter cover	For the Pre imprinter option
11	ADF	The documents loaded onto the Hopper will be fed sheet by sheet
	(Automatic document feeder)	for scanning.
12	Hopper extension	Pull the Hopper extension out for loading long documents.
13	Hopper	Documents to be scanned are loaded onto the Hopper.
14	Hopper side guides	Sheet Guides used to make sure that the paper to be scanned is
		fed into the scanner straight, avoiding skew.
15	Power button	Switch the scanner ON&OFF.

21.1 Names and Functions of Parts