Fujitsu fi-5950 ■Temporary Errors, Display, Meaning, Solution, PROBLEMS COMMON SOLVING, [J] or [U] and a number will be displayed alternately

■Temporary Errors

[J] or [U] and a number will be displayed alternately.

(When pushing the [Scan] or [Send to] button, the error indication on the function number display will disappear and the scanner goes into the ready status.)

Display	Meaning	Solution
J0	The paper feeding stopped to protect jammed	1. Remove the jammed document. Refer to “6.1
	paper from damage.	Clearing Document Jams” on page 134.
U1	A paper jam occurred.	2. Confirm if the document conditions are appropri-
		ate for scanning with the ADF. (Refer to “7.2
		Document Quality” on page 159)
U2	A Multifeed occurred.	When pushing the [Send to] on the Operator panel,
		the multi fed papers will be ejected.(*1)
U4	The ADF or the Pre-Imprinter cover is opened.	Close the ADF cover or Pre-Imprinter cover cor-
		rectly.
U6	The print cartridge of the imprinter (sold sepa-	This error occurs only when the imprinter option
	rately) is not set.	(sold separately) is used.
		Refer to the “fi-590PRF/fi-590PRB Imprinter
		Operator Guide” for further details.
U8	One of the following error occurred:	1. Clean the document sensors.
	1. Document sensors are dirty.	For details, refer to “4.5 Cleaning the Transport
	2. The stacker is full.	path and the sensors” on page 114.
	3. The Brake roller or Separator rollers are not	2. Verify that the number of sheets ejected to the
	installed properly.	stacker is below stacker’s capacity, and that the
		Pick roller is not set for manual feeding.
		3. Verify that the both rollers are installed properly.
		For details, refer to “5.5 Replacing the Separator
		Rollers” on page 128 and “5.6 Replacing the
		Brake Roller” on page 131.

(*1) If you press the [Send to] button before the error message is displayed on the PC screen, multifed documents are not ejected.

6

PROBLEMS COMMON SOLVING

6.2 Error messages of the Operator panel 137