Fujitsu fi-5950 ■Resetting of the consumable/cleaning counters, 1.Click the [Clear] button beside the replaced consumable

■Resetting of the consumable/cleaning counters

Reset the consumable/cleaning counter(s) every time you replace the consumable or clean the scanner, following the procedure given below.

ATTENTION

In View Only mode, the Software Operation Panel cannot be reset. For details on "View Only mode", refer to “Password Setting” on page 175.

5

1.Click the [Clear] button beside the replaced consumable.2.Click the [OK] button on the displayed confirmation message.

⇒The value of the counter will be reset to “0”. (“100”, in case of “Remaining Ink”).

3.To close the window of the [Software Operation Panel], click the [OK] button.

CONSUMABLES OF REPLACEMENT

5.2 How to check and reset the Consumable/Cleaning Counter 123