Fujitsu fi-5950 1848.1 Scanner Settings

Item	Explanation		Selectable parameter			Default
Dropout color	Drop out a preselected color for the scanned	Red/Green/Blue/None				Green
“Section 8.7”	image. (Binary black & white/grayscale
	mode only)
Pre-Pick	To give a higher priority to processing	Yes/No				Yes
“Section 8.8”	speed, select [Yes], if not, select [No].
Page Edge Filler	Fill the end sections of a specified-mm-wide	Top/Left/Right/Bottom: 0 to				Top/Bottom/
(Automatic Page	with white when the paper size is automati-	7.5mm (can be set in incre-				Left/Right:
Size Detection)	cally detected.	ments of 0.5mm)				0mm
“Section 8.9”	The end sections of a specified-mm-wide are
	filled with white.
				A	B
		(A: Image area B: Filled
		area
		A+B: Area to be output)
Document check	Selected range: This is checked to make fol-	Selected range				Not checked
area specifica-	lowing checking area specification effective.
tion for Multifeed
	Enable/Disable: Specifies whether left/mid-	Enable/Disable				Invalid
Detection
	dle/right each ultrasonic sensor is enabled or
“Section 8.4”
	disabled.
	Start: The start point of the check area in	0 to 510 mm, with 2 mm incre-				0 mm
	length (mm) from top edge of the document	ment
	is specified.
	End: The end point of the check area in	0 to 510 mm, with 2 mm incre-				0 mm
	length (mm) from top edge of the document	ment
	is specified.
Intelligent Multi-	When a fixed size of paper is pasted on the	Manual mode/Auto mode 1/				Manual mode
feed Function	same location in multiple sheets, the scanner	Auto mode 2
“Section 8.10”	can memorize the size and location of the
“Section 3.12”	pasted paper so it will not be detected as a
	multifeed. To use this function, you need to
	select [Check Overlapping] as the multifeed
	setting by the procedure described in
	“Section 3.7” or “Section 8.4” in advance.
	Specify whether or not to remember the	Remember/Do not remember				Do not
	multifeed pattern at power-off.					remember
Number of paper	This is specified to decrease picking retry	1 to 12 times				12 times
feeding retries	times for earlier jam detection.
“Section 8.11”

1848.1 Scanner Settings