5.Speficy the detection area.

Selected range: Add check mark to this checkbox first. The following setting becomes available.

Left Middle Right

35 35 35

directionFeeding

Detection areasDocument

60 60

Unit: mm

Enable/Disable : Select [Enable], if the area from [Start] to [End] is a Multifeed detection area. Select [Disable], if the area from [Start] to [End] is not a Multifeed detection area, but other

 

area is a Multifeed detection area.
Start

: You can specify the starting position of the selected range by the length from the

 

edge of the paper document.

 

Range: 0 to 510mm, in increments of 2mm, Start position<End position
End

: You can specify the ending position of the selected range by the length from the edge

 

of the paper document.

 

Range: 0 to 510mm, in increments of 2mm, Start position<End position

1928.4 Multifeed Detection