Fujitsu fi-5950 8.23 Jam Detection Outside of Scannable Area When Transporting paper

8.23Jam Detection Outside of Scannable Area When Transporting paper

If this function is turned On, such a case, in which the documents are fed outside of the scannable area due to over-skew, is judged as a jam. You can turn it On and Off.

Configure the settings for the Jam detection outside of scannable area when transporting paper as follows:

1.Start up the Software Operation Panel.

Refer to “8.1 Scanner Settings” on page 173.

2.Select [Device Setting 2] from left side list in the window, and select [Jam detection outside of scannable area when transporting paper] from its lower level.

8

SETTINGS SCANNER

3.Select “Enable” to judge such a scan as a jam, and select “Disable” not to judge it as a jam.

8.23 Jam Detection Outside of Scannable Area When Transporting paper 215