Fujitsu fi-5950 [Default] button, [Restore] button, 1868.1 Scanner Settings, Saves contents of various settings onto the computer

Item	Explanation	Selectable parameter	Default
Timeout for man-	Specify the standby time period. After the	5, 10, 20, 30, 40, 50, 60, 70, 80,	10 seconds
ual feeding	predetermined time period has elapsed,	90, 100, 110 ,120, 180, 240,
“Section 8.25”	manual feeding mode is canceled.	300, 360, 420, 480, 540, 600,
		900, 1200, 1800, 1999
		(seconds)
Scan Setting for	When the document has tab on the bottom	Document with tab/Document	Document
Document with	edge of the image, the tab image remains	without tab	without tab
Tab(Automatic	even if the document is scanned with
Page Size Detec-	Automatic Page Size Detection. When
tion)	“Tab-attached document” is specified, the
“Section 8.26”	tab image remains in the scanned data but
	the scanning speed may be rather slow.
Paper stop posi-	When a multifeed error is detected by over-	Normal / Paper output slot	Normal
tion at multifeed	lapping of documents, the position to stop
error	the documents on which the multifeed
“Section 8.27”	occurred can be selected.
Overscan Control	Specify the optimal amount of black mar-	Normal / Optimize	Normal
“Section 8.28”	gins for overscan.

[Default] buttonResets the current settings to the factory setting. [Save]buttonSaves contents of various settings onto the computer.(Use this button to apply the same settings to other fi-5950 scanners.)

ATTENTION

Saving outputs the EEPROM value currently written in the scanner. Click the [Apply] button first if you have changed the value immediately before saving.

[Restore] buttonRestores contents of the settings saved onto the computer back to the scanner.

1868.1 Scanner Settings