Fujitsu fi-5950 8.7 Dropout Color, Refer to, 1988.7 Dropout Color, None: No dropout occurs, 3.Select a color to drop out, Start up the Software Operation Panel

8.7 Dropout Color

By using the “Dropout Color” function, you can scan documents with the specified color removed from the light’s three primary colors, or red, green, blue.

(This function is available for the binary black and white setting as well as the grayscale setting.)

For example, you can scan only the black part of letters when scanning the document containing black letters each with a green frame.

Configure the settings for the Dropout Color as follows:

1.Start up the Software Operation Panel.

Refer to “8.1 Scanner Settings” on page 173.

2.Select [Device Setting 2] from left side list in the window, and select [Dropout Color] from its lower level.

3.Select a color to drop out.Red, Green, Blue: Red, green, or blue is dropped out.None: No dropout occurs.

ATTENTION

The Dropout Color setting can also be configured using the scanner driver setting window. (The scanner driver setting window is given a priority over Software Operation Panel.)

When configuring the setting through Software Operation Panel, you cannot select other colors than red, green, and blue. If you want to drop out any other colors, use the scanner driver setting window.

For details on how to configure settings through the scanner driver setting window, refer to “3.5 Excluding a Color from the image (drop out color)”.

1988.7 Dropout Color