Fujitsu fi-5950 ■Single Feed, 1.Lift up the Pick roller unit, ⇒The Pick roller unit will click into place, ⇒The hopper will move up to the manual feed position

■Single Feed

1.Lift up the Pick roller unit.Lift up the small plate on the left side using your finger.

Pick Roller Unit

Hopper

⇒The Pick roller unit will click into place.⇒The hopper will move up to the manual feed position.

2

OPERATIONS SCANNER BASIC

ATTENTION

• If there is any document loaded on the Hopper, remove it before adjusting.

•Be careful not to get your fingers or anything caught in the mechanism when the hopper table moves up.

2.Place documents face-up at the center of the hopper table.

At this moment, do not stick the top edge of the document against the inner side of the hopper, instead set them a bit apart.

2.12 Feeding Documents Manually 37