8.24 Imprinter Selection

You can specify which imprinter to use; Pre-imprinter or Post-imprinter, if you already have installed these options.

Configure the settings for the Imprinter Selection as follows:

1.Start up the Software Operation Panel.

Refer to “8.1 Scanner Settings” on page 173.

2.Select [Device Setting 2] from left side list in the window, and select [Imprinter selection] from its lower level.

3.Select the Imprinter to use.
Normal (obey Host specification) :Complies with the scanner driver setting.
Forcibly select Pre-imprinter

:

Pre-imprinter is forcibly used to print unless directed by

 

 

the scanner driver.
Forcibly select Post-imprinter

:

Post-imprinter is forcibly used to print unless directed by

 

 

the scanner driver.

HINT

For details on the specifications of the imprinter, refer to “9 OPTIONS” on page 223.

2168.24 Imprinter Selection