[Paper Handling] tab

Pre-pick

With this option, you can enable or disable Pre-picking. Pre-picking is an operation that feeds documents into the ADF (to the scanning position) before starting actual scanning operation. Select “On” to shorten the required time for scanning.

Backing

With this option you can set the background color (Black/White).

Multi-feed Detection

Multi-feed is an error that occurs when two or more sheets are fed simultaneously. You can set conditions so that the scanner will stop its operation and display an error message when Multi- feed is detected.

Multi-feed can be detected based on the “Paper Overlapping” or “Paper Length”.

Skew

With this option, you can set the scanner so that it will stop its operation and display error messages when any skewed document is detected.

Do not stop scanning upon detection

With this option, you can set the scanner so that it continues scanning even if any Multi-feed or skew is detected.

Multifeed Recovery

Scaning is not restarted for the set period (minutes) of time after a multifeed error. This period is specified here. If scanning is not started after the set minutes, the application is notified of the error by the driver. If Auto-cancel timer is set to 0, the application will never be notified of the error.

2

OPERATIONS SCANNER BASIC

2.13 Configuring the Scan Settings

 

53