Fujitsu fi-5950 Unit: mm, Setting Example 1:, Left, Disable, Start=50 mm, End=200 mm, Middle, Enable, Start=50 mm, End=200 mm, Right, Disable, Start=50 mm, End=200 mm

	• When both “Start“ and “End“ positions are set to 0 (zero), a multi feed error
HINT	will be detected over the whole area, regardless of the setting of “Enable“
	or “Disable“.
	• If you wish to deactivate the detection for all of the areas, please select
	“Disable” and set “Start” to 0 (zero), while choosing a value greater or
	equal than the document length for “End”.

•If “Start” is set to a value beyond the size of a document, the detection area is as follows:

When “Disable” is selected: The whole area of the document is the detection area.

When “Enable“ is selected: Multi feed detection is disabled.

•For the multi feed detection, it is necessary to specify the range for the length to at least 5 mm.

Please perform the setting for the detection area so, that following condi- tion is met:

[“End:” position] - [“Start:” Position] ≧ 6mm

•You can also specify the check area by the following other methods.

−By dragging the mouse on the setting area window to create rectangular

−By moving the edge grip at Start or End in the setting area

Setting Example 1:Left, Disable, Start=50 mm, End=200 mmMiddle, Enable, Start=50 mm, End=200 mmRight, Disable, Start=50 mm, End=200 mm

  





(GGFKPIFKTGEVKQP

Unit: mm

 

8

SETTINGS SCANNER

8.4 Multifeed Detection 193