Fujitsu fi-5950 2.7 Setting up the Stacker, ■Stacking the document, 222.7 Setting up the Stacker, 1.Pull out the stacker extension in accordance with document length

2.7 Setting up the Stacker

The document set on the hopper, once scanned, will be ejected onto the stacker.

You can adjust the inclination of Stacker table to align the leading edge of document or not. Also you can fix the height of Stacker table for thin paper stacking.

Set up the Stacker by adjusting the Stacker extension, Stopper, Side Guides and Stacker's inclination.

■Stacking the document

1.Pull out the stacker extension in accordance with document length.

Stacker extension

Stopper

Function

Hopper Height

Thin

Send to

Power Thickness Thick

Scan

ATTENTION

•Do not use the stopper to pull out the stacker extension. It may be dam- aged.

•Be sure to extend the stopper longer than the document.

For short documents, use the small stopper.

HINT

Small Stopper

222.7 Setting up the Stacker